david
New Member
Posts: 5
|
Post by david on Sept 3, 2017 9:39:53 GMT
Hi Jerolac, I first encountered your goggles at a booth in Korea. Its very high quality and can't wait to buy one once its available. I was hoping you are able to include the L-Band channel support up to 48 channels, it'll be great! Also it would be handy if you are able to include a simple spectrum analyzer to check for bleeding/Faulty VTXs in the firmware. Thanks Regards David
|
|
|
Post by Elliot on Sept 5, 2017 3:07:10 GMT
Hi Jerolac, I first encountered your goggles at a booth in Korea. Its very high quality and can't wait to buy one once its available. I was hoping you are able to include the L-Band channel support up to 48 channels, it'll be great! Also it would be handy if you are able to include a simple spectrum analyzer to check for bleeding/Faulty VTXs in the firmware. Thanks Regards David Hi David, Thank you very much for your interest in our goggles. We are going to test L-band channels on our built-in modules and apply it if possible. And about the spectrum analyzer, we do have a little feature to scan and show simplified display of RF environment around you. Thank you
|
|
|
Post by tiagostb on Sept 11, 2017 19:06:57 GMT
RX MODULE QUESTIONS
Hello!
I'm a rookie on fpv and I'm very anxious to put my hands on this goggles but I have some questions about it. Are they built in one RX with diveristy or with two RX? What kind of rx will use? Can they be changed? In case of a hardware failure how is it going to be? Are they open source rx with future fw updates? Hope it don't take to long to be released because i'm very interested on them! Please make it with great recieving range and not much static and interferences and blackouts as possible!! Do your best in this product because we don't mind to spend a little more but have a great and reable product! They look great with futurist and modern design. Good work!!!
Thank you!
|
|
|
Post by Elliot on Sept 12, 2017 6:58:37 GMT
RX MODULE QUESTIONS Hello! I'm a rookie on fpv and I'm very anxious to put my hands on this goggles but I have some questions about it. Are they built in one RX with diveristy or with two RX? What kind of rx will use? Can they be changed? In case of a hardware failure how is it going to be? Are they open source rx with future fw updates? Hope it don't take to long to be released because i'm very interested on them! Please make it with great recieving range and not much static and interferences and blackouts as possible!! Do your best in this product because we don't mind to spend a little more but have a great and reable product! They look great with futurist and modern design. Good work!!! Thank you! Hi tiagostb, Kaptain G has 2 RXs in it and they can't be changed. If the goggles are still under warranty, we will replace it without any charge. The RX is not open source but we will provide firmware and try our best to satisfy our customers. We're planning new antennas and RF solutions as well and hope it would make FPV environment better.
|
|
david
New Member
Posts: 5
|
Post by david on Sept 12, 2017 16:34:36 GMT
Hi Jerolac, I first encountered your goggles at a booth in Korea. Its very high quality and can't wait to buy one once its available. I was hoping you are able to include the L-Band channel support up to 48 channels, it'll be great! Also it would be handy if you are able to include a simple spectrum analyzer to check for bleeding/Faulty VTXs in the firmware. Thanks Regards David Hi David, Thank you very much for your interest in our goggles. We are going to test L-band channels on our built-in modules and apply it if possible. And about the spectrum analyzer, we do have a little feature to scan and show simplified display of RF environment around you. Thank you Hi Elliot, Thank you for your reply. Looking forward to buy one when it's available. Do post some updates on your distributors when available. I have also subscribed to your facebook page. Cheers David
|
|
|
Post by Elliot on Mar 28, 2018 8:50:05 GMT
In the recent test, we recognised we can add L band to Kaptain G but the L band channels would be worse than other bands on the current version. We decided not to add it at the moment because Kaptain G doesn't have external module bay so the RF performance should be good enough.
|
|
david
New Member
Posts: 5
|
Post by david on Apr 5, 2018 19:57:32 GMT
In the recent test, we recognised we can add L band to Kaptain G but the L band channels would be worse than other bands on the current version. We decided not to add it at the moment because Kaptain G doesn't have external module bay so the RF performance should be good enough. Hi Elliot, Thank you for testing the L-Band! Nice to know you guys are working with the tests. Cheers David.
|
|